2 / 15
■Important Safety Instructions
1. The installation must be in compliance with the National Electrical Code, your local electrical and plumbing
codes.
2. This appliance must be EARTHED. (If the model is equipped with plug, it is an electric leakage protection plug).
3. Install or locate this water heater only in accordance with the provided installation instructions.
4. Use this water heater only for its intended use as described in this manual.
5. Contact a qualified electrician to have unit properly installed.
6. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction use of the
appliance by a person responsible for their safety.
7. This appliance MUST be permanently connected to the fixed circuit breaker and it must be installed vertically. DO NOT
install this appliance near to tinder or strong magnetic field place. Children should be supervised to ensure that they do
not play with the appliance.
8. This appliance is forbidden to be switch on if you think it may be frozen, as this could result in serious damage to the
unit. Wait until you are sure that it has completely thawed out before you switch it on.
9. Please feel the outlet hot water temperature with hand to make sure it is suitable for showering before taking shower to
avoid getting scalded.
10. Before connecting pipes to the water heater hoses, it is extremely important to FLUSH the pipes to wash away all
plumbing paste or residue in the pipes.
11. If there is damage to the wire, you must contact qualified electrician.
12. Run water through the outlet periodically, in order to remove calcium carbonate deposits.
13. The drain-pipe which connected to the water relief valve should be installed continuous downward in frostless
environment.
14. The spray head must be descaled regularly.
To Next Page
Loading...
Need help?
General
