EasyManua.ls Logo

Rheem Stellar 8A0 330 User Manual

Rheem Stellar 8A0 330
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This water heater must be installed and serviced by a qualified person.
Please leave this guide with the householder.
Owners Guide
and
Installation Instructions
Gas Domestic Outdoor Water Heater
8A0 330 stainless steel model
Question and Answer IconNeed help?

Do you have a question about the Rheem Stellar 8A0 330 and is the answer not in the manual?

Rheem Stellar 8A0 330 Specifications

General IconGeneral
Model8A0 330
CategoryWater Heater
Energy SourceElectric
ThermostatAdjustable
Capacity330 liters
Warranty10 years

Summary

About Your Water Heater

Scalding Injury Risk

Warns about scalding risk and recommends temperature limiting devices.

Safety and Prohibited Materials

Details safety devices, warranty exclusions for tampering, and prohibited materials near the heater.

Regular Care and Maintenance

Temperature Pressure Relief Valve

Describes the function and operation of the temperature pressure relief valve and its maintenance.

Water Supply Considerations

Water Chemistry Summary Affecting Warranty

Lists specific water chemistry parameters that can void the warranty.

Troubleshooting Common Issues

No or Insufficient Hot Water

Troubleshooting steps for insufficient hot water, including usage and pilot flame checks.

Low Hot Water Temperature Issues

Addresses issues of low hot water temperature and checks for mixing valve settings.

Relief Valve Operation Issues

Explains normal operation and potential faults of the relief valve.

Pilot Flame Ignition Problems

Troubleshooting steps for issues with lighting the pilot flame.

High Gas Bills Troubleshooting

Checks to perform if gas bills are higher than expected, including relief valve and usage.

Installation Guide

Installation Standards and Requirements

Lists requirements for installation by qualified persons, following instructions and standards.

Selecting the Water Heater Location

Details requirements for selecting a safe and accessible location for the water heater.

Hot Water Delivery and Scalding Risk

Discusses scalding risk and the requirement for temperature limiting devices.

Plumbing Connections

Temperature Pressure Relief Valve Fitting

Instructions for fitting the relief valve, sealing threads, and insulating it.

Gas Inlet Connection Procedure

Instructions for connecting the gas supply pipe, including isolation valve and union.

Commissioning the Water Heater

Filling and Initial Turn-On

Steps for filling the water heater with water and turning it on, including checks.

Gas Inlet Pressure Checks

Importance of checking gas supply pressure with all appliances operating.

Gas Supply Pressure Testing Procedure

Procedure for testing and adjusting the gas supply pressure to the water heater.

Burner Gas Pressure Testing and Adjustment

Procedure for checking and adjusting the burner gas pressure.

Lighting the Water Heater Safely

Pre-Lighting Safety Instructions

Crucial safety warnings and precautions to take before lighting the water heater.

Pilot and Burner Lighting Procedure

Step-by-step guide for safely lighting the pilot flame and main burner.

Post-Installation Operational Checks

Checks to perform on the water heater's operation after installation is complete.

Draining the Water Heater

Rheem Water Heater Warranty

Related product manuals