To Next PageTo Next Page
Need help?Do you have a question about the Rheem Iconic RTGH-SR11i and is the answer not in the manual?
General| Type | Tankless |
|---|---|
| Fuel Type | Natural Gas |
| Flow Rate | 11 GPM |
| Warranty (Parts) | 5 years |
| Water Connection | 3/4 inch NPT |
| Water Pressure Range | 20-150 PSI |
| Voltage | 120V |
| Thermal Efficiency | 94% |
| Ignition Type | Electronic |
| Warranty (Heat Exchanger) | 12 years |
| Gas Connection | 3/4 inch NPT |
| Energy Factor | 0.93 |
| Energy Efficiency | High |
Essential safety precautions regarding electrical hazards and flammable materials.
Guidelines for setting safe water temperatures to prevent scalding.
Lists essential tools for measuring voltage, resistance, and gas pressure.
Outlines safe procedures for taking electrical measurements on the unit.
Technical specifications including dimensions, gas consumption, and electrical requirements.
Identifies control board connectors and key diagnostic points for troubleshooting.
Explains LCD functions, status, WiFi setup, and operational mode settings.
Addresses issues with no hot water delivery, checking flow and unit enablement.
Guides through diagnosing thermistor errors by checking resistance and connections.
Guides on resolving flame detection failures, ignition problems, and gas supply issues.
Diagnoses problems related to blocked venting or airflow issues.
Step-by-step instructions for removing the front cover of the unit.
Procedure for removing the gas-air ratio valve, including screw and pipe disconnection.
Instructions for safely removing the flame rod, including its bracket.
Step-by-step guide to removing the main control board and its bracket.
Guides users through downloading the EcoNet app and connecting the water heater to WiFi.
