Rheem Fury User Manual

Water Heaters
Electric Residential
The purpose of this manual is twofold: one, to
provide the installer with the basic directions
and recommendations for the proper
installation and adjustment of the water heater;
and two, for the owner–operator, to explain the
features, operation, safety precautions,
maintenance and troubleshooting of the water
heater. This manual also includes a parts list.
It is imperative that all persons who are
expected to install, operate or adjust this water
heater read the instructions carefully so they
may understand how to perform these
operations. If you do not understand these
instructions or any terms within it, seek
professional advice.
Any questions regarding the operation,
maintenance, service or warranty of this water
heater should be directed to the seller from
whom it was purchased. If additional
information is required, refer to the section on
“If you need service.”
Do not destroy this manual. Please read
carefully and keep in a safe place for future
reference.
Recognize this symbol as an
indication of Important Safety
Information!
California Proposition 65 Warning:
This product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
!
!
Single and Double Element Models,
Residential 20–120 Gallon
®
LISTED
786H
AP9029-9 (01/05)
Printed in USA
Use & Care Manual
With Installation Instructions for the Installer

Rheem Fury Specifications

General

Brand	Rheem
Capacity	50 gallons
Fuel Type	Natural Gas
Vent Type	Atmospheric
Warranty	6 years

Summary

Safety Information

Water Temperature Setting

Discusses scald hazards, time-temperature relationships, and proper water temperature settings.

General Safety Precautions

Outlines essential safety measures for installation, operation, and maintenance.

California Installation Requirements

Details California law regarding seismic bracing for water heaters up to 52 gallons.

Installation Instructions

Local Installation Regulations

Details compliance requirements with local codes, utility codes, and the National Electrical Code.

Location Requirements

Guidance on selecting a suitable, safe, dry, and accessible location for the water heater.

Thermal Expansion Control

Explains thermal expansion in closed systems and suggests installing an expansion tank.

Water Supply Connections

Recommendations for connecting hot and cold water lines, including unions and shut-off valves.

Electrical Connections

Details branch circuit requirements, wire sizing, and grounding for electrical connections.

Operating Instructions

Safety Controls and ECO Reset

Explains the temperature limiting control (ECO) and the manual reset procedure.

Water Temperature Setting

Guides on adjusting the thermostat for desired water temperature and energy savings.

Care and Cleaning

Draining the Water Heater

Step-by-step instructions for safely draining the water heater.

Routine Preventative Maintenance

Recommends periodic checks of controls, elements, and anode rod for optimal performance.

Vacation and Extended Shut-Down

Advises on turning off power/water and draining for long periods to prevent gas buildup.

Anode Rod

Explains the anode rod's function in tank protection and recommended inspection schedule.

Troubleshooting Tips

Before You Call For Service

Provides a chart of common problems, possible causes, and recommended solutions.

Customer Service

Replacement Parts

Lists required information for ordering replacement parts for the water heater.

If You Need Service

Outlines steps for contacting installers, service agencies, or the manufacturer for assistance.

Wiring Diagrams

Provides electrical schematics for single, double, and 3-phase applications.