Rheem Iconic RTGH-SR11i - User Interface Operation and Settings

IKONIC Tankless Water Heater Service Manual
16
This Tankless water Heater has the Liquid Crystal Dis-
play (LCD) on the user interface.
This user interface allows you to adjust the water tem-
perature and view the operating status or error codes.
GENERAL INFORMATION
1.4 LCD ON THE USER INTERFACE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
UNLOCK / LOCK (HOLD 3 SEC)
Warning
Blower On
Recirculation On
Screen Lock
Burner On
Status
Icons
Set Point
Temperature
Control
Button
Indicator
Icons
Control
Buttons
Cloud Connectivity
Wi Fi
Diagnostic
1.4.1 SETTING TO ENABLE/DISABLE TO WATER HEATER
This tankless water heater can set the enable/disable mode with the Liquid Crystal Display (LCD) on the User Inter-
face.
1. Press the “MODE” button. After the LCD displays
“ENABLE/DISABLE”, press the “ENTER” button.
2. The factory setting is “DISABLE”. Press the “▼” or
“▲” button to select “ENABLE” or “DISABLE” and
press the “ENTER” button.
To exist this setting, press "BACK" button until ini-
tial screen is displayed.
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
DISABLEENABLE/DISABLE
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
DISABLEENABLE/DISABLE