Need help?Do you have a question about the Rhima DEKO 190iX and is the answer not in the manual?
General| Model | DEKO 190iX |
|---|---|
| Manufacturer | Rhima |
| Voltage | 230V |
| Frequency | 50 Hz |
| Material | Stainless steel |
| Dimensions | 600 x 850 mm |
| Wash tank element | 2.0 kW |
| Temperature Range | up to 93°C |
Basic precautions, electrical safety, installation, unauthorized access, and cycle interruption warnings.
Safe handling of detergents, chemicals, burn hazards, door stability, disposal, and safety symbols.
Lists types of human waste containers suitable for cleaning and disinfection.
Lists devices excluded from processing and materials suitable for thermal disinfection.
Specifies ambient temperature, humidity, storage time, and atmosphere.
Details electrical ratings, pollution degree, installation category, humidity, temperature, and altitude.
Overview of Normal, Intensive, Emptying, and Long cycles for the DEKO 190iX.
Details standard cycles specific to the Australian and New Zealand regions.
Visual representation of cycle temperature changes and phase sequences.
Specifies time, temperature, and detergent volume for each cycle phase.
Information on detergent dosage, types, and pre-cleaning requirements.
Guidelines on detergent type, foaming, pH, and safe handling.
Discusses detergent dosage, washing temperature, and water quality standards.
Details water quality requirements and specifications for testing.
Identifies machine components, displays, and keyboard for operation.
Step-by-step guide on starting and navigating through cycles.
Instructions for opening/closing doors and loading various items into the machine.
Visual examples of how to load different items and accessories.
How to start cycles, view steps, and manage standby mode.
How to cancel cycles, handle temperature warnings, and interpret display information.
How to unload, recognize cycle completion, and understand printer reports.
Methods for recording and saving cycle data via SD card or FTP server.
Instructions for using the Deko Cycle Data Viewer software for cycle curves.
Identifies common warnings controllable by the user and their explanations.
Describes fault displays, error codes, and actions for incomplete cycles.
Explains the optional panel printer, its button, and paper.
Explains purging and disinfection procedures, especially after idle periods.
Outlines daily checks for sprayers and weekly cleaning of sieve and panels.
Recommends regular flushing of chemical dosing systems to prevent blockages.
Guide to setting the machine's date and time via the user interface.
Refers to EN ISO standards for operational, performance, and routine testing.
Instructions for recycling packaging, electronic parts, metal parts, and disposing of chemicals.
Declares compliance with directives and applied harmonized standards.
Outlines warranty period, coverage for defects, and exclusions like misuse or external influences.
Lists necessary information for making a warranty claim, including serial number.
Details malfunctions related to door, sensors, water, and chemical supply with user actions.
Lists malfunctions related to water level, circulation, temperature, and door interlocks needing service.
Step-by-step guide for removing, replacing, and adjusting the detergent container.
Instructions for checking and cleaning spray washers and urine bottle nozzles.
Details electrical ratings, cold and hot water inlet requirements, and flow rates.
Specifications for waste outlet, steam, and condensate connections for steam models.
Guidelines for machine placement, clearance, and ventilation requirements.
To Next Page