
Do you have a question about the Rhino-Rack S512 and is the answer not in the manual?
| Brand | Rhino-Rack |
|---|---|
| Model | S512 |
| Category | Automobile Accessories |
| Language | English |
Illustrates the physical arrangement and components of the kayak carrier system.
Details the weight limit for the kayak carrier and roof racks, emphasizing even load distribution.
Provides crucial advice on installation, maintenance, and safe usage of the kayak carrier.
Explains how to adjust roof rack load ratings for off-road use and accounts for crossbar weight.
Advises on secure fixing points for utility vehicles to prevent damage between cabin and canopy.
Lists all included parts for the kayak carrier, including straps and fitting instructions.
Details optional C-channel fitment kits required for specific Rhino-Rack and other crossbar types.
Instructs users to wash and clean vehicle roof racks before installing the kayak carrier.
Demonstrates the process of unfolding the kayak carrier's cradle mechanism.
Illustrates how to properly position and load a paddle into the carrier.
Details how to tighten the cradle and secure the kayak using straps.
Shows the correct method for pulling straps tight and looping them under the crossbars.
Explains the installation and use of the optional S512X extension for wider loads.
Guides on loading a second kayak or canoe and repeating the securing steps.
Details replacing bolts and using pliers for rubber cover insertion in the C-channel kit.
Instructions for fitting the carrier to Rhino Sportz, Aero, Thule Rapid, and Rola bars using C-channel.
Describes installing the carrier onto Rhino Heavy Duty bars using the C-channel method.
Explains installation on European bars using hex bolts and U adaptors.
Details fitting to Rola & old Rola Commercial bars using T-bolts and locking tabs.
Loading...