Rhythm Healthcare P2-E6 User Manual (English)

Other manuals for Rhythm Healthcare P2-E6

Instruction Manual36 pages

Getting Started Guide6 pages

Questions and Answers:

P
ppatelAug 5, 2025
What to do if my Rhythm Healthcare P2-E6 device won't turn on?
- J
  juanperkinsAug 5, 2025
  If your Rhythm Healthcare medical equipment device isn't turning on, there are several potential causes and solutions: * **Battery Issues**: Ensure the battery is correctly installed by removing it and re-installing it. If the battery is depleted, use the AC or DC power adapter to operate the device (with the battery inserted) to recharge it. If this doesn't work, contact your equipment provider. * **AC Power**: Check the AC power connection and verify the solid green light on the adapter. * **DC Power**: Check the DC power connection at the cigarette lighter or auxiliary DC power source.
A
Amanda BerryAug 10, 2025
Why is there no oxygen coming from my Rhythm Healthcare Medical Equipment?
- H
  hernandezchristinaAug 10, 2025
  If you're not getting any oxygen from your Rhythm Healthcare medical equipment, consider these possibilities: * **Device Status**: Make sure the concentrator is turned on. * **Cannula Check**: Inspect the cannula for any kinks or obstructions and ensure it's properly connected to the oxygen outlet port. * **Equipment Failure**: If neither of the above solutions works, there may be equipment failure. In that case, contact your provider.
C
Caitlin BryantAug 15, 2025
How to fix oxygen not at full concentration on Rhythm Healthcare P2-E6?
- N
  nyoungAug 15, 2025
  If the oxygen concentration isn't at its full level on your Rhythm Healthcare medical equipment, it might be due to the following reasons: * **Warm-up Time**: Allow the device 2 minutes to warm up. If the problem persists, please contact your equipment provider. * **Sieve Beds**: The sieve beds may require servicing. Contact your provider to change the sieve beds.
B
Brenda MurphyAug 20, 2025
What to do if Rhythm Healthcare Medical Equipment device won't turn on?
- N
  Nicole JosephAug 20, 2025
  If your Rhythm Healthcare Medical Equipment device isn't turning on, there could be several reasons. First, ensure the battery is correctly installed by removing and re-installing it. If the battery is depleted, use the AC or DC power adapter to recharge it while operating the device. Check the AC power connection to ensure it's properly connected and the adapter shows a solid green light. Also, verify the DC power connection at the cigarette lighter or auxiliary DC power source.

Rhythm Healthcare P2-E6 Specifications

General

Manufacturer	Rhythm Healthcare
Product Category	Portable Oxygen Concentrator
Model	P2-E6
Battery Duration (single battery, setting 2)	Up to 4 hours
Battery Duration (double battery, setting 2)	Up to 8 hours
Warm-up Time	2 Minutes
Power Supply	AC/DC/Battery
Pulse Dose Settings	1 to 5

Related product manuals

Rhythm Healthcare P2

6 pages

Rhythm Healthcare LM5BA

23 pages

Rhythm Healthcare P2-E6 Manual

Table of Contents

Other manuals for Rhythm Healthcare P2-E6

Questions and Answers:

Rhythm Healthcare P2-E6 Specifications

Related product manuals