Ribimex RIBILAND PRJET61 - User Manual

38 pages

Go to English

Save Page as PDF

To Next Page

Page 1 / 38

POMPE DE SURFACE ET

POMPE DE SURFACE AVEC GROUPE DE SURPRESSION

Manuel d’instructions et d’utilisation

POMPA DI SUPERFICIE AUTODESCANTE E

COMPRESSORE CON POMPA DI SUPERFICIE AUTODESCANTE

Manuale di istruzioni e di manutenzione

GARDEN PUMP AND GARDEN BOOSTER PUMP

User and maintenance manual

PUMPE UND HAUSWASSERWERKE

Bedienungs- und Wartungsanleitung

PRJET61 / 512556

PRJET81 / 512576

PRJET101 / 512586

PRJET121 / 512596

PRGJET101I / 516336

PRJET150L / 511566

PRS19JET61 / 517626

PRS24JET81 / 517636

PRS24JET101 / 517736

PRS50JET121 / 517871

PRSI24JET101I / 517266

Imp. par / by: Ribimex S.A. – 56 Route de Paris – FR-77340 Pontault-Combault

Imp. da: Ribimex Italia srl – Via Igna 18 – IT-36010 Carrè (Vi)

[v2_2018-09-01]

Main Page

Questions and Answers

C
chasemyersJul 28, 2025
What to do if my Ribimex RIBILAND PRJET61 has less water outlet?
- E
  Eric FerrellJul 29, 2025
  If your Ribimex Water Pump is producing less water, several factors could be responsible. The head might be too high, so ensure you're operating within the rated head range. The strainer or inlet hole could be clogged; remove any water weed or foreign matter. A badly worn impeller will reduce water flow, so consider replacing it. If the pump's submersion is too shallow, it might be sucking in air; adjust the submersion depth to at least 0.5m. Also, inspect the discharge hose for disconnections, leaks, or wear, and fix or replace it as needed.
L
laura34Aug 11, 2025
Why my Ribimex RIBILAND PRJET61 has a difficult start?
- R
  Ryan LawrenceAug 11, 2025
  A Ribimex Water Pump might be difficult to start due to several reasons. The power voltage could be too low; in that case, adjust the voltage to be within 0.9 to 1.1 times the rated range. Alternatively, the impeller might be clogged; if so, adjust the clogged part. Finally, a big loss of cable voltage could be the culprit; select the proper cable to resolve this.

Summary

Parts List and Characteristics

Parts List

Lists all components and accessories included with the pump for identification and verification.

Characteristics

Details the technical specifications and performance data of the pumps, such as power and flow rate.

Safety Instructions

READ ALL THE INFORMATION BEFORE OPERATING THE PRODUCT

Essential general precautions for safe product operation, handling, and environmental awareness.

Special warnings when using the pump

Specific safety advice and precautions to be observed during pump usage, including electrical and water hazards.

Safety prescriptions

Mandatory safety requirements for power supply, installation, grounding, and extension cord usage.

Getting Started

Unpacking

Instructions for removing the pump and accessories from packaging and checking for damage.

Important recommendations

Key guidelines for proper installation, placement on a level surface, and electrical connection checks.

Electrical connection

Detailed steps and safety checks for connecting the pump to the power supply, including socket and cable requirements.

Connecting the suction line

Guidance on attaching the intake hose, its diameter, sealing, and placement for proper water suction.

Connecting the discharge line

Instructions for connecting the outlet hose, ensuring it is rigid and kink-resistant for water delivery.

Starting up

Procedure for priming the pump with water and starting it for the first time, including dry run warnings.

Operation

Intended use

Defines the specific applications for household use and lists prohibited uses like pumping solids or hot liquids.

Operation

Steps for normal running, automatic pressure cycles, and how to start, stop, and advise users.

Advise for users

Important tips and warnings for optimal and safe pump usage, including avoiding dry runs and power failures.

Maintenance and Storage

Maintenance

Routine care procedures like draining for winter, cleaning, and avoiding abrasive materials.

Breakdown

Guidance on what to do in case of pump malfunction or damage; recommends authorized service centers.

Troubleshooting

Identifies common problems like difficult start, low water outlet, or sudden stops and provides solutions.

Storage

Instructions for storing the pump correctly in a dry, ventilated location, out of reach of children.

Disposal

Environmentally responsible methods for disposing of the pump and accessories via collection centers.

Ribimex RIBILAND PRJET61 Specifications

General

Model	PRJET61
Category	Water Pump
Maximum Suction Height	8 m
Power Source	Electric
Voltage	230 V
Frequency	50 Hz
Inlet Diameter	1 inch
Outlet Diameter	1 inch
Impeller Material	Noryl
Type	Jet Pump
Housing Material	Plastic