Ricatech RR700 - Auxiliary Input and Troubleshooting; Auxiliary Jack Connection

AUXILIARY JACK CONNECTION “AUX IN” (IF EQUIPPED)
1. Connect your own device (i.e. MP3 player or IPOD) to the “AUX IN” socket (located at the back of
unit) with stereo plug and detachable rack (packed separately).
2. Adjust the ON / OFF switch next to the jack to the „ON‟ position.
3. Rotate the mode selector to “CD-AUX”.
4. Adjust the sound with the VOLUME knob or the volume control of the device.
5. When changed to another mode, the device will continue to play with no sound until the ON / OFF
switch is adjusted to the „OFF‟ position and the device is
switched off.
IMPORTANT NOTE:
1. When not using the auxiliary jack, adjust the ON / OFF switch to the „OFF‟ position.
The CD function will resume to normal only after the ON / OFF switch is adjusted to „OFF‟ position.
ENGLISH - 5