Need help?Do you have a question about the Rice Lake INT700 and is the answer not in the manual?
Defines safety symbols and general safety precautions for operation.
Explains the LCD display layout and annunciators.
Details the function of each key on the control panel.
Step-by-step guide for physically installing the scale.
Illustrates port locations and load cell/RS-232 connection diagrams.
Details pin assignments for analog and checkweighing outputs.
Explains the function and connection of the mercury level bubble option.
Step-by-step procedure for performing normal calibration.
Procedure for calibrating the scale's linearity.
Guide for performing external calibration with reference weights.
How to zero the scale display and notes on auto-re-zeroing.
Steps for taring the scale, including with containers and multiple products.
Procedure for weighing a sample using tare.
Explains the checkweighing function and its modes (OK/NG).
Steps to set high (H) and low (L) limits for checkweighing.
Configures the beep behavior for checkweighing limits.
How to turn off the checkweighing function by setting limits to zero.
Overview of accumulating weights and its purpose.
Detailed steps to manually accumulate weights into memory.
How to clear accumulated data from memory.
Configuration of automatic accumulation during self-check.
How to activate and use the animal weighing mode.
Explains how to lock/unlock the keyboard and its auto-lock feature.
Instructions for adjusting or setting the display backlight.
Configuration options for the automatic power off function.
Overview of the parameter setting process.
Lists common error codes and their resolutions.
Information about the battery option, charging, and indicators.
Specifications for the RS-232 output, including connector pinouts.
Describes the data format for normal weighing output.
Details the data format for continuous output.
Technical specifications for different INT700 models.
To Next Page
General