What to do if Rice Lake TC-220 Scales display [o - Err] before reaching capacity?
If the Rice Lake Scales show '[o - Err]' even before reaching full capacity, it means the total weight, including the container and sample, exceeds the scale's limit. Alternatively, a part of the mechanism might be broken. Verify the total weight on the scale. If the issue persists, contact a qualified technician or your local dealer.
Why does the Rice Lake TC-220 weight indication contain an error?
If your Rice Lake Scales weight indication contains an error, it could be due to a mistake during tare subtraction. Review the tare subtraction procedure. Also, check that the level adjusters are correctly set, ensuring the scale is level. If you've been using the scale for a long time or have moved it, perform a span adjustment.
What to do if Rice Lake Scales display [u - Err]?
If the Rice Lake Scales display '[u - Err]', a foreign object might be trapped between the measuring pan (or pan base) and the scale itself. Remove the measurement pan to inspect the area beneath it. It is also possible that a component of the mechanism is damaged, so inspect the removed parts for damage.
Why does the limit function not work on my Rice Lake TC-220 Scales?
If the Rice Lake Scales limit function isn't working, ensure that the limit function is enabled. Also, check that the limit value has been correctly entered.
Why do Rice Lake TC-220 show [o - Err], [1 - Err], or [2 - Err] during span adjustment?
If, during span adjustment, the Rice Lake Scales display '[o - Err]', '[1 - Err]', or '[2 - Err]', it could be due to using a weight heavier than the scale's capacity or a reference weight less than 50% of the capacity. It may also indicate a calibration error of 1.0% or more. Verify that the span adjustment procedure was correctly executed.
Why is the display unstable on my Rice Lake TC-220?
If the Rice Lake Scales display is unstable and '[M]' keeps flashing without changing, it could be because the scale is exposed to air currents or vibration, or it's placed on an unstable surface. Also, make sure that nothing is touching the sample, the measuring pan, or the tare.
What to do if Rice Lake TC-220 Scales display [Add] and [?] flashing at [LO]?
If the Rice Lake Scales display shows '[Add]' and '[?]' along with a value flash at '[LO]', it's likely that the sample weight is insufficient, which can cause errors in counting mode. To resolve this, use the Memory Update Method.
How to troubleshoot no display on Rice Lake TC-220?
If the Rice Lake Scales show no display, ensure the AC adapter is properly connected.
What does it mean when Rice Lake Scales display [b - Err] or [d - Err]?
If '[b - Err]' or '[d - Err]' is displayed on the Rice Lake Scales, the unit may be exposed to static electricity or noise, or the electrical system may be malfunctioning. Contact a qualified technician or your local dealer.
Why does the Rice Lake TC-220 Scales indication disappear during battery installation?
If the Rice Lake Scales indication disappears, '[ ]' flashes, or there's no indication during battery installation, the automatic power-off function may have been activated. Switch the power back on, and disable the automatic power-off function if needed. Also, the battery capacity might be low, so try recharging the battery.
To Next Page
General