Need help?Do you have a question about the Rice Lake CLS-680 and is the answer not in the manual?
Safety signal definitions and general safety precautions for operating the equipment.
Compliance information for FCC rules and Canadian regulations regarding radio interference.
Details the Weigh Mode, User Mode, and Setup Mode for device operation.
Instructions for unpacking, inspecting, and physical dimensions of the CLS-680 unit.
Guides on how to mount the CLS-680, including details for RAM mounting.
Details connection ports for power, junction box, and serial communications on the enclosure.
Procedures for opening the CLS-680 enclosure and reattaching the backplate safely.
Details the CPU and DC Power boards, switches, and connectors for operation and setup.
Lists part numbers for the CLS-680, its RAM mount option, and components included in the parts kit.
Specifies torque ratings for components and instructions for sealing the enclosure for security.
Overview of the CLS-680 front panel, including display, buttons, and LED annunciators.
Explains LED indicators and how to navigate CLS-680 menus using front panel buttons.
Procedures for entering numeric and alphanumeric values for parameters using the keypad.
Covers core operations like Zero Scale, Print Ticket, Toggle Units, and Gross/Net Mode.
Details how to access setup mode using the setup switch and the role of the audit switch.
Overview of CLS-680 main menu structure and parameters within the Audit menu.
Breakdown of the Setup menu and its main parameter categories like Configuration, Format, and Communication.
Parameters for User Mode, Unit ID, Tare Function, Graduations, Decimal Point, Display Divisions, and Units.
Parameters for calibration procedures and communication port settings (J-box, RS232, WiFi/BT).
Settings for program parameters, print formats, and stream data formats.
Important notes and methods for preparing the scale and weights for calibration.
Step-by-step guide for performing one-fork and two-fork linear calibration using the front panel.
Procedure for performing rezero calibration, especially after using lifting devices.
Instructions for setting up WiFi using the built-in Web Manager, including Soft AP details.
Technical specifications for the Lantronix® xPico 200 Series wireless module used in the CLS-680.
Steps to enable Bluetooth® and pair with a Bluetooth® device using the Web Manager.
Technical specifications for the Bluetooth® Core Specification and profiles supported by the wireless module.
Procedure for installing and setting up the Zigbee module for cableless communication.
Commands simulating key presses and retrieving system information like audit trail and firmware version.
Commands for resetting configuration, setting wireless parameters, and serial port configurations.
Commands to set scale parameters, define stream formats, and manage features like date/time.
Commands for customizing print formats and retrieving data in weigh mode.
Lists tokens used to configure print formats, including weight data, accumulator, and auditing tokens.
Guide to customizing print formats using the front panel and including special ASCII characters.
Lists error messages and provides procedures for updating the CLS-680 firmware.
Details continuous data stream formats and the ASCII character chart for print formatting.
Describes CLS-680 display characters and how to convert weights to different units.
Information on audit trail support and the ZZ EDP command for querying annunciator status.
Details power, communication ports, display, keys, temperature range, dimensions, material, and warranty.
Specifications for the cableless option battery, including type, capacity, charging, and LED signals.
Lists approvals and certifications for the CLS-680, including NTEP, FCC, and IC IDs.
To Next Page
General