ITM. / ART. 966690
RM20-2SS Traveler Grill
Notes About LP Gas Tank Exchange Programs
• Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange
service. Use only those reputable exchange companies that inspect, precision fill, test and certify their
tanks. Exchange your tank only for an OPD safety feature equipped tank as described in the LP gas tank
section of this manual.
• Always keep new and exchanged LP gas tanks in an upright position during use, transit or storage.
• Leak test new and exchanged LP gas tanks BEFORE connecting one to your grill.
Testing For Gas Leak
• Test all connections for gas leaks before first use, at the beginning of each new season, or when gas
cylinder is changed.
• Make sure procedure is carried out in a well ventilated area and never in the presence of flame, sparks or
heat source. If you smell gas, never attempt to light the grill.
• Make sure that all temperature knobs on the grill are in the OFF position.
• Open the gas valve of the gas cylinder and / or the pressure regulator.
• Test all connections for leaks. For testing use a half water / half soap solution. Apply the solution to the
connection points with a clean paint brush.
• If bubbles occur, immediately turn off the gas supply on the valve of the gas cylinder. Tighten all
connections again and repeat the test.
• If gas bubbles still occur, do not use the grill and contact the RICHMAN Grills customer service hotline
at: 1-866-898-8187 in North America, M-F 9:00am – 4:30pm PST, or by email at
info@richmangrills.com.
Warning
Never check for gas leaks using a match or any other open flame due to risk of explosion.
Warning
When your gas cylinder is empty, do not try to refill it by yourself . Bring it back to an authorized reseller who will
safely refill it or exchange it.
13
08/28/13
To Next Page
Loading...