Pre-installation
ELECTRICAL REQUIREMENTS
RECOMMENDED GROUNDING METHOD
This air conditioner must be grounded. This air conditioner is equipped with a power supply cord with a three-prong grounding plug. The
cord must be plugged into a three-prong outlet, grounded in accordance with all local codes and ordinances. If a grounded outlet is not
available, it is the customer’s responsibility to have a properly grounded three-prong outlet installed by a qualified electrical installer.
It is the customer’s responsibility:
•
To contact a qualified electrical installer.
•
To assure that the electrical installation is adequate and conforms to the Nation Electrical Code, ANSI/NFPA 70-last edition, and
all local codes and ordinances.
•
Copies of the standards listed may be obtained from: National Fire Protection Association
1 Batterymarch Park
Quincy, Ma 02169-7471 www.nfpa.org
WIRING REQUIREMENT
WARNING: Electrical shock hazard
-Plug into grounded 3-prong outlet.
-Do not remove ground prong.
-Do not use an adapter.
-Do not use an extension cord.
-Failure to follor these instructions can result in death, fire or electrical shock.
To Next Page
Loading...