Ricoh 700 Series User Manual

Name: Ricoh 700 Series
Brand: Ricoh
Rating: 5 (1 reviews)

62 pages

To Next Page

To Previous Page

Specifications

This section contains the electrical and hardware specifications for the printer,

including the information about the options.

Component Specification

Resolution 600dpi ; PCL 5e, PCL 6, PostScript 3

Printing Speed 55ppm, 70ppm

(A4

, 8

11"

)

Note

❒

Printing Speed depends on the machine. Confirm which

machine you have.

Parallel Interface Standard 36-pin printer cable and a parallel port on the host

computer.

IEEE1284

Note

❒

Do not use a parallel cable that is longer than 3 meters (10

feet).

Printer Language PCL 5e , PCL 6

PostScript 3 (option)

Fonts

PCL 5e, PCL 6

35 Intellifonts, 10 Trutype fonts, and 1 Bitmap font Font

Manager available.

PostScript 3

136 Adobe Type 1 fonts

Memory

Standard :

32MB

Optional SDRAM :

32MB, 64MB, 128MB

Hard Disk

Storage capacity :

6GB or more

Operation Systems

supported by this

printer

Windows 95/98

Windows 2000

Windows NT 4.0

Mac OS

Network

Topology :

Ethernet 10BASE-T/100BASE-TX

Protocol :

TCP/IP, IPX/SPX, AppleTalk

Network Cable 10BASE-T/100BASE-TX shielded twisted-pair (STP, Catego-

ry/Type5) cable.

Questions and Answers:

K
Katherine AndersonJul 28, 2025
What to do if Ricoh 700 Controller says 'An unformatted disk was detected'?
- P
  Patricia GlassJul 28, 2025
  If the Ricoh Controller displays 'An unformatted disk was detected', it means the controller detected an unformatted hard disk when powered on. You can format the hard disk by touching the [Yes] key. Alternatively, touch the [No] key to cancel formatting and switch the machine to online mode. Note that if the message reappears, the hard disk requires formatting. Formatting will delete any fonts installed on the hard disk.