PRINTING QUALITY PROBLEMS
SM 4-27 B273
Trouble-
shooting
4.5.15 BLANK PAGE 1
Description: Blank page is printed.
Cause Solution
Bad ground contacts in the OPC and/or toner
cartridge.
Check if the ground OPC or the OPC ground
Zener diode are defective. Clean the terminals
on the toner cartridge and cartridge set.
4.5.16 BLANK PAGE 2
Description: Blank page or several blank page (s) are printed,
or several blank pages are printed when the machine is turned
on.
Cause Solution
Defective solenoid. Perform the engine self test mode in Tech
Mode to check if the solenoid operation is
intermittent or defective. Replace the main
PBA if the problem persists.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
B273T928.WMF
B273T929.WMF
To Next Page
Loading...
