SPECIFICATIONS
B273 7-2 SM
2. PHYSICAL SPECIFICATIONS
Printing operation 370 W
Energy saver
mode
30 W (energy start compliant)
Power consumption
Power switch Supported
Low voltage 110-127 V
High voltage 220-240 V
Power supply
Input frequency 50/60 (± 3Hz)
Printing 54 dB
Copy 55 dB
Noise
Standby 33 dB
Warm up time (from
energy saver mode)
Less than 42 seconds
3. PRINT SPECIFICATIONS
22 ppm LT
Print speed
20 ppm A4 (600 dpi)
Printer drivers PCL6
Auto emulation sensing Supported
Font 45 Scalable, 1 Bitmap
Energy Save Mode 5/10/15/30/45 min
Normal 600 x 600 dpi Resolution
RET 1200 x 1200 dpi
Toner save mode Supported
Memory 16 MB
From standby Less than 10 seconds First print time
From energy saver
mode
Less than 50 seconds
Duplex print Not supported
Printable area 208 x 273 mm (Letter)
Halftone grayscales 128 levels
To Next Page
Loading...
