COVERS
SM 3-3 B273
Replacement
Adjustment
3.2.2 SIDE COVERS
Remove the following before removing the side covers:
Rear cover 3.2.1
NOTE: Remove the paper tray unit before removing the side covers.
Right Cover
1. Open the front cover and remove 2 x on the front, and 1 x on the back.
2. Release 3 x clips [A] underneath the cover.
3. Ease the rear screw bracket over its location pin and gently slide the right cover
[B] to the right.
4. Remove the right cover from the frame.
B273R905.WMF
[A]
[B]
To Next Page
Loading...
