Fig.
18
AUTO-FOCUS SHOOTING
1. Set the main
subject
within the Auto-Focus Frame in the
center of the Viewfinder. (Fig.
17)
2. When you press the Shutter Release Button halfway, the
AF
Monitor will light
up
to indicate the
subject
is in
focus
.
If the AF Monitor blinks, you should move
back
a little, as
the camera is too close to the subject. (Fig.
18)
3. If the AF Monitor glows steadily, press the Shutter
Release Button all the way down to take the picture.
As
soon as one picture is taken, the film is advanced
auto-
matically, ready for the next shot. (Fig.
19)
Note: Depress the Shutter Release Button slowly to ensure
correct
operation of the
auto-focus
system. Depressing the
Shutter Release Button is really a two-step process. The first
step (halfway down) is the camera setting the
proper
focus.
This happens when the AF Monitor lights
up
. The second
step (all the way down) is the actual taking of the picture.
13
To Next Page
Loading...
