9. Remove the fan motor [G]. (2 screw, 1 connector.)
10. Remove the development drive motor assembly [H] (3 connectors,
3 screws).
11. Remove the gear cover [I] (2 screws).
12. Remove the development drive holder [J] (1 E-rings, 3 screws).
13. Replace the development drive gear [K] or the toner supply clutch [L]
(2 Allen screws).
[G]
[J]
[K]
[I]
[L]
A195R657.wmf
[H]
A195R656.wmf
INNER AND OUTER COVERS 25 April 1997
44
To Next Page
Loading...
