• Load only as much envelopes as can be held between the paper guides on the bypass tray. For the
number of envelopes that you can set on the bypass tray, see “Recommended Paper Sizes and
Types”, About This Machine.
•
Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print
margin, to at least 15 mm (0.6 inches) each.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a
pencil or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
• Printing on envelopes may be slower than printing on plain paper.
• For details about supported envelope types, see “Envelopes”, About This Machine.
2. Basic Copying
54
To Next Page
Loading...
