Erase Centre/Border
Erases both the centre and edge margins of the original image.
• The relationship between the original orientation and the erased part is as follows:
original original
1. Erased part
2. 2 - 99 mm (0.1 - 3.9 inches)
• To erase the image on the back side of the original, press [2 Sided Setting] and then [Back]. Erasing
the image on the back side is valid when you copy 2-Sided originals.
• The erase width is set to 10 mm (0.4 inch) as a default. You can change this setting under Edit in User
Tools. For details about Edit, see “Edit”.
Advanced Copier Functions
161
To Next Page
Loading...
Need help?
General
