Alert Sound: Original left on Exposure Glass
The beeper (Key tone) sounds if you forget to remove originals after copying.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [Off], the beeper does not sound
irrespective of the "Alert Sound: Original left on Exposure Glass".
Job End Call
Choose whether or not the beeper sounds when copying is complete.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [On], the machine beeps to notify you
that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of
paper, or a paper jam occurred.
Customize Function: Copier
You can assign up to six frequently-used functions to Copy Function keys.
The default setting for "Customize Function: Copier 1" is 1 sided 2 sided:TtoT.
The default setting for "Customize Function: Copier 2" is 2 sided 2 sided.
The default setting for "Customize Function: Copier 3" is 1 sided Comb 2 orig.
The default setting for "Customize Function: Copier 4" is 1 sided Comb 4 orig.
The default setting for "Customize Function: Copier 5" is Create Margin.
The default setting for "Customize Function: Copier 6" has not been set.
Customize Function: Document Server Storage
You can assign up to six frequently-used functions for scanning documents on the Document Server
Storage keys.
General Features
217
To Next Page
Loading...
Need help?
General
