1. [Back]
Click this to return to the [Configuration] menu of Web Image Monitor.
2. [Start Up/Stop]
Click this to set the selected additional program to either "Starting Up" or "Stop".
3. Additional program list
Displays a list of installed additional program.
Selection
Click the radio button of the additional program you want to set to "Starting Up" or "Stop". Click [Start Up/
Stop] after selecting.
Additional Program Name
Displays the names of additional program.
Properties
Displays an information screen for the additional program, which allows you to check its [Properties] icon.
No.
Displays the ID of each additional program that is installed.
Status
Displays the status of additional program.
• Starting Up
Additional program are activated.
• Stop
Additional program are deactivated.
• Suspend
Additional program are activated but are in standby status. You must reboot before you can use these
features.
Web Image Monitor Operations Screens
17
To Next Page
Loading...
