1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the
originals one by one.
2. Exposure glass
Place originals face down here.
3. Control panel
4. Tray Extension
Pull this fence to prevent paper from falling off.
5. Main power switch
To operate the machine, the main power switch must be on. If it is off, open
the main power switch's cover and turn the switch on.
6. Paper Tray
Paper is loaded here.
7. Left Cover
Open to access the waste toner bottle.
8. Vents
Prevent overheating.
9. Standard Tray
Copied/printed paper and fax messages are delivered here.
11
To Next Page
Loading...
