What to do if my Ricoh All in One Printer shows a Level B service call condition?
If your Ricoh All in One Printer indicates a Level B service call condition, try turning the main power switch off and then on again. This may resolve the issue.
What to do if my Ricoh All in One Printer shows a Level C service call condition?
If your Ricoh All in One Printer indicates a Level C service call condition, try turning the main power switch off and then on again.
How to fix a Level A service call condition on my Ricoh B121?
To address a Level A service call condition on your Ricoh All in One Printer, enter SP mode. Then, turn the main power switch off and on.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Scan Type | Flatbed |
| Connectivity | USB |
| Operating System Compatibility | Windows |
Specifies the environmental, power, and other requirements for installing the machine.
Details the procedure for installing the copier, including accessory checks and power connections.
Covers installation procedures for optional controller boxes, printer scanners, and fax units.
Tables detailing preventive maintenance tasks for Optics, Drum Area, Paper Feed, Fusing Unit, ADF/ARDF.
Step-by-step guide on how to reset the Preventive Maintenance counter using SP mode.
Important safety and handling precautions for replacing or adjusting components like PCU, transfer roller, and scanner.
Detailed descriptions of scanner components, including exposure glass, lens block, and sensors.
Information on laser unit components, caution decals, toner shield glass, and alignment adjustments.
Procedures for adjusting printing registration, blank margins, and scanner settings.
Explains different levels of service call conditions and their reset procedures.
Lists common electrical component defects for sensors, switches, and fuses with symptoms and causes.
Identifies blown fuse conditions and their impact on machine operation.
Details on using SP mode, starting SSP mode, selecting and specifying values, and activating copy mode.
Explains image processing stages including SBU, IPU, VCU, and various image enhancement techniques.
Procedures for replacing exterior covers, feed units, separation rollers, pick-up rollers, feed belts, and sensors.
Cautions, warnings, accessory check, and installation procedures for the fax unit.
Lists error codes for LAN communication and fax SC codes with suggested causes and actions.
Details on accessing IFAX bit switches, SP modes for RAM, machine settings, ROM versions, and reports.
Information on controller errors and LED indicators for the GW controller.
Provides installation procedures for the optional controller box, printer/scanner, and fax.
Covers IFAX installation, initial settings, and security considerations.
Lists error codes for LAN communication and troubleshooting procedures for network issues.
To Next Page
