Ricoh B121 - 2.2 HOW TO RESET THE PM COUNTER

HOW TO RESET THE PM COUNTER
SM 2-3 B121 Series/B259 Series
Preventive
Maintenance
2.2 HOW TO RESET THE PM COUNTER
After preventive maintenance work, reset the PM counter (SP7-804-001) as
follows.
1. Activate the SP mode (see section
5.1).
2. Select SP 7-804-001 ("Reset–PM
Counter").
3. Press the OK key [A]. The
message "Execute" is displayed.
4. Press the button [B] below the
message "Execute." The
messages "Execute?" followed
by "Cancel" and "Execute" are
displayed.
5. To reset the PM counter, press
the button [C] below the
message "Execute."
6. Wait until the message
"Completed" is displayed.
7. Quit the SP mode.
B121P901.WMF
B121P901.WMF
B121P901.WMF
B121P901.WMF
[A]
COPY(Class3) 0-9/< >/OK
7.804.001 Reset-PM Counter
COPY(Class3) 0-9/< >/OK
7.804.001 Reset-PM Counter
Execute
[B]
COPY(Class3)
7.804.001 Reset-PM Counter
Execute?
Cancel Execute
[C]
COPY(Class3)
7.804.001 Reset-PM Counter
Completed