Ricoh B121 - Auto Image Density (ADS)

IMAGE PROCESSING
B121 Series/B259 Series 6-22 SM
Auto image density (ADS)
In the SBU
ADS prevents the background of an original from appearing on copies. As the
scanner scans down the page, the IPU on the BICU detects the peak white level
for each scan line. The IPU determines the reference value for the A/D conversion
for a particular scan line using the peak white level for that scan line. Then, the IPU
sends the reference value data to the reference controller on the SBU.
When an original with a gray background is scanned, the density of the gray area is
the peak white level density. Therefore, the original background will not appear on
copies. Because peak level data is taken for each scan line, ADS corrects for any
changes in background density down the page.
As with previous digital copiers, the user can select manual image density when
selecting ADS, and the machine will use both settings when processing the
original.
By Original Type
ADS mode is only enabled when the user has selected:
• Text mode 1 or 2 (Normal or Sharp), Photo mode 2 (Text/Priority), or Special
mode 1 or 2 (Unneeded background or Colored Text).
This can be done using Adjust Original Mode (3) in User Tools (Copier Features).