Ricoh B121 - Paper-Jam Handling; Resetting the Copier

PAPER-JAM HANDLING
B621 10 SM
3.2 PAPER-JAM HANDLING
3.2.1 RESETTING THE COPIER
The paper-jam sign is displayed when one of the two conditions (! 3.1) is met. To
get the copier ready for normal operation, you must:
1) Remove the paper.
2) Open and close the right cover [A] of the copier.
3) Open and close the base unit [B].
Note that you must open and close the right cover of the copier to reset the copier
when the 1-bin tray unit has caused a paper jam.
B621T902.WMF
B621T901.WMF
[B]
[A]