Ricoh B121 - Settings

SETTINGS
SM 5 B621
One-Bin Tray
B621
2.2 SETTINGS
Settings
Use the User Tools to specify which application program (the copy, printer, or fax
application program) uses the 1-bin tray. Locate the user tool as follows:  >
System Settings > General Features > Output: Copier, Output: Facsimile, Output:
Printer.
Limitation
The machine can output to the 1-bin tray if the paper is fed from a regular tray or
from an optional tray. Paper fed from the by-pass tray is not output to the 1-bin tray.
The paper source setting takes precedence
over the paper exit setting. As a result,
paper fed from the by-pass tray is output to
the copier exit tray even if you have
specified the 1-bin tray as the exit. In a
case like this, no warning or message is
displayed.
Setting Paper source Actual output
1-bin tray Regular tray 1-bin tray
1-bin tray Optional tray 1-bin tray
1-bin tray By-pass tray Copier tray