ENERGY SAVER MODES OF MFP MACHINES
B121 Series/B259 Series 6-74 SM
6.16 ENERGY SAVER MODES OF MFP MACHINES
This section (6.16) illustrates the energy saver modes of the MFP machine (the
machine with the optional controller). For the energy saver modes of the basic
machine (the machine without the optional controller), see section 6.15.
Overview
The machine has three energy-saver modes: the Low Power Mode, the Transit
Mode, and the Night/Off Mode. The Transit Mode continues for about two seconds
(probably, the user does not recognize this mode when it occurs). The table lists
the status of several components. For the fusing temperature, see section 6.13.5.
Operation panel Engine Exhaust fan
Operating Mode* On On On
Low Power Mode Off On Off
Transit Mode Off On Off
Night/Off Mode Off Off** Off
* The "Operating Mode" here refers to all the modes (or status) other than the Low Power Mode
and Night/Off Mode. Actual power consumption (during the Operating Mode) depends on job
status and environmental conditions.
** The SRAM is alive and backs up the engine controller.
AOF
See "AOF" in section 6.15.
B121D916.WMF
Power
consumption
Operating Mode
Low Power Mode
Night/Off Mode
Time
Energy Saver
Timer
Auto Off Timer
Transit Mode
2 seconds
t
0
System Auto
Reset Time
To Next Page
Loading...
