Ricoh B121 - Installing Fax Option (B620); Installing Panels and Keys; Panel; Reassembling

B658/B263 4 SM
1.3 INSTALLING FAX OPTION (B620)
1. Attach the ferrite core [A] to the telephone
cable [B]. The end of the ferrite core must be
about 5 cm (2") from the end of the cable [C].
Initializing the Fax Unit
When you press the Fax key for the first time
after installation, an error occurs. This is not a
functional problem. Press OK. The fax starts its initialization program.
NOTE 1: If another error occurs after initialization, this could be a functional
problem.
NOTE 2: For detailed information on the B620 Fax Option, see the B620 Service
Manual
1.4 REASSEMBLING
1. Reassemble the controller box.
2. Install the rear cover.
1.5 INSTALLING PANELS AND KEYS
1.5.1 PANEL
1. Remove the front upper left cover [A]
(3 screws).
2. Install the optional operational panel
[B] (1 connector and 4 screws
[including three screws removed in
step 1]).
B658I907.WMF
B658I908.WMF
[B]
[A]
[A]
[B]
[C]