Ricoh B121 - Sp2-XXX (Ram)

SERVICE PROGRAM MODE
B620 16 B620
SP1-XXX (BIT SW)  Section 3.2 Bit Switches
1
Mode No. Function
System Switch 101
001 – 032 00 – 1F
Change the bit switches for system settings
for the fax option
 Section 3.2 Bit Switches
Ifax Switch 102
001 – 016 00 – 0F
Change the bit switches for IFAX settings
 Section 3.2 Bit Switches
Printer Switch 103
001 – 016 00 – 0F
Change the bit switches for printer settings
for the fax option
 Section 3.2 Bit Switches
Communication Switch 104
001 – 032 00 – 1F
Change the bit switches for communication
settings for the fax option
 Section 3.2 Bit Switches
G3-1 Switch 105
001 – 016 00 – 0F
Change the bit switches for the protocol
settings of the standard G3 board 
Section 3.2 Bit Switches
SP2-XXX (RAM)
2
Mode No. Function
RAM Read/Write 101
001
Change RAM data for the fax board directly.
 Section 3.5 Service RAM Addresses
Memory Dump 102
001 G3-1 Memory Dump
Print out RAM data for the fax board. 
Section 3.5 Service RAM Addresses
G3-1 NCU Parameters 103
001 – 023 CC, 01 – 22
NCU parameter settings for the standard
G3 board.  Section 3.3 NCU Parameters