INSTALLATION REQUIREMENTS
SM 1-3 B121 Series/B259 Series
Installation
1.1.3 MINIMUM SPACE REQUIREMENTS
Place the copier near the power source, providing clearance as shown:
A (front): 750 mm (30")
B (left): 150 mm (6")
C (rear): 50 mm (2")
D (right): 250 mm (10")
NOTE: The recommended 750 mm front space is sufficient to allow the paper tray
to be pulled out. Additional front space is required to allow operators to
stand at the front of the machine.
1.1.4 POWER REQUIREMENTS
CAUTION
1. Make sure that the wall outlet is near the machine and easily accessible.
After completing installation, make sure the plug fits firmly into the
outlet.
2. Avoid multi-wiring.
3. Be sure to ground the machine.
1. Input voltage:
North and South America, Taiwan: 110 – 120 V, 60 Hz, 12 A
Europe, Asia: 220 – 240 V, 50/60 Hz, 7 A
B121I901.WMF
[C]
[D][B]
[A]
To Next Page
Loading...
