TRAY OPEN SWITCH
SM 1 B621
One-Bin Tray
B621
1. REPLACEMENT AND ADJUSTMENT
CAUTION
Turn off the main power switch and unplug the machine before beginning
any of the procedures in this section.
NOTE: This manual uses the following symbols.
! : See or Refer to : Screws : Connector : Clip ring
: E-ring
1.1 TRAY OPEN SWITCH
1. Remove the tray [A] as follows:
" Lift the front end of the tray.
# Pull the right hook off the copier.
$ Pull the whole tray off the copier.
B621R901.WMF
[A]
"
#
$
To Next Page
Loading...
