Ricoh B121 - NVRAM Download (SP5-825-1)

SERVICE PROGRAM MODE
SM 5-83 B121 Series/B259 Series
Service
Tables
NVRAM Download (SP5-825-1)
SP5-825-1 copies the data from the flash memory card to the NVRAM. The
following data is NOT copied (the data in the NVRAM remains unchanged):
• SP8-221-001 (ADF Original Feed [Front])
• SP8-221-002 (ADF Original Feed [Back])
• SP8-381-001 (Total: Total Printer Pages)
• SP8-382-001 (Copy Application: Total Print Pages)
• SP8-391-001 (Large Size Print Pages [A3/DLT, Larger])
• SP8-411-001 (Prints Duplex)
1. Turn off the main switch.
2. Remove the card cover [B] (1 rivet).
3. Turn the face of the flash memory card [A] ("A" is printed on it) toward your left-
hand side,and insert it into the card slot.
4. Turn on the main switch.
5. Start the SP mode and select SP5-825-001.
6. The machine erases the current settings, then writes the new settings onto the
NVRAM on the BiCU board. This takes about 1 second. If downloading fails, an
error message appears. If an error message appears, retry the download
procedure.
7. Turn off the main switch.
8. Remove the memory card.