Ricoh B121 - Laser Unit; Toner Shield Glass

LASER UNIT
SM 3-19 B121 Series/B259 Series
Replacement
Adjustment
3.5.2 TONER SHIELD GLASS
1. Open the front door.
2. Lift the toner cartridge latch [A].
3. Press the toner shield glass cover
[B] to the left and pull it out.
4. Pull out the toner shield glass [C].
3.5.3 LASER UNIT
1. Toner shield glass. ( 3.5.2)
2. Copy tray ( 3.3.3)
3. Pull out the (upper) paper tray.
4. Front cover ( 3.3.6)
5. Laser unit [D] ( x 2,  x 4)
NOTE: The screw at the left front
position [E] is longer than the
other three.
B121R964.WMF
B121R965.WMF
[B]
[C]
[A]
[D]
[E]