Ricoh B121 - Key Counter Installation

KEY COUNTER INSTALLATION
SM 1-31 B121 Series/B259 Series
Installation
1.11 KEY COUNTER INSTALLATION

CAUTION
Unplug the machine power cord before starting the following procedure.
1. Remove the left cover ( 3.3.8).
2. Remove the rear cover ( 3.3.1).
3. Remove the cap [A] with nippers.
4. Punch out the small hole [B] using a screwdriver.
5. Hold the key counter plate nuts [C] on the inside of the key counter bracket [D]
and insert the key counter holder [E].
6. Secure the key counter holder to the bracket ( x 2).
7. Install the key counter cover [F] ( x 2).
B121I906.WMF
B121I100.WMF
[B]
[A]
[E]
[F]
[D]
[C]