Ricoh B121 - Full Mode; Overview; Registering Remote Machine Feature; Sending Data and Request

T.37 FULL MODE
SM 35 IFAX
IFAX
4.4 T.37 FULL MODE
4.4.1 OVERVIEW
Model K-C2 supports the T.37 Full Mode. The T.37 Full Mode provides the
following functions:
• The local machine registers the features of remote machines to the address
book. () 4.4.2)
• The local machine, referencing the registered features, sends appropriate
data to remote machines. The "appropriate data" here includes the request
for receipt notification. () 4.4.3)
• The local machine sends the receipt notification that includes the feature
report of the local machine. () 4.4.4)
• The local machine receives receipt notifications (from remote machines) that
include the feature reports of the remote machines. The local machine
interprets the feature reports and registers the features to the address book.
() 4.4.5)
4.4.2 REGISTERING REMOTE MACHINE FEATURE
The local machine registers the following features of remote machines:
• Paper width: A4/B4/A3
• Resolution: 200 x 100/200 x 200/200 x 400
• Data compression: MH/MR/MMR
As default, the features of remote machines are registered as follows: A4, 200 x
100/200 x 200, MH. You cannot manually register any feature that is inconsistent
with the default () "Error Handling" in section 4.4.5).
4.4.3 SENDING DATA AND REQUEST
The local machine, before sending data, references the registered feature of the
remote machine and converts the data into an appropriate format. The local
machine sends the request for receipt notification with the data.