p. 2
Code Action
J097
J098
Do the following when using colored, pre-printed, or black paper.
1. Set No. 116 [Color Paper Edge Detection Adjustment] in Advanced Settings to [10.00].
Note: You can easily change this value using Web Image Monitor.
2. If step 1 does not solve the issue, set No. 115 [Illumin. Mode for Color Paper Detection] in
Advanced Settings to [Long Time].
3. If steps 1 and 2 do not solve the issue, set No. 118 [Deactivate Image Position Adjustment Across
Feed Dir] in Advanced Settings to [Activate].
Note: After this step is performed, the position of the image on the paper may vary.
To Next Page
Loading...
