EasyManua.ls Logo

Ricoh D124 - Page 64

Ricoh D124
429 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
MO-C1 Training
Slide 64
Installing the 2
nd
Roll Unit - 4
After installing the optional roll unit, check the clamps and
harnesses.
Make sure that the clamps are closed and that there is
absolutely no slack in the harnesses.
The harnesses must be flat up against the bottom of the
PCB box to prevent them from interfering with paper in the
bypass feed path.
» The cables must not hang below the red line in the photo
above.
During bypass feed, the trailing edge of the paper comes out from the back of
the machine, and then reverse feeds back into the machine.