Ricoh DX 2330 - Selecting Original Type; Original Type Modes

Operation
30
1
Selecting Original Type
Select one of the following two types
to suit your originals:
❖ Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
❖ Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
❖ Letter/Photo mode
Select this mode when your origi-
nals contain photographs or text
with pictures.
Note
❒ Moire patterns might occur when
screened originals are printed.
❒ When using Photo mode to print
originals with both letters and
photographs, the letters will ap-
pear lighter.
A Press the {Type of Original} key to
select either Letter or Photo mode.
Note
❒ When both the Photo mode and
Letter mode indicators light up,
Letter/Photo mode is selected.
B Press the {Image Density} key to ad-
just the image density.
C Place the original in the document
feeder.
D Press the {Master Making} key.
E Check the image position on the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {Image
Position} key (see p.21 “Shifting
the Print Image Position For-
wards or Backwards”) or by
moving the position of the pa-
per (see p.22 “Shifting the Print
Image Position to the Right or
Left”).
F Make your prints.
BQA007S
BQA004S
AQP003S