To Next PageTo Next PageWhy do black lines or stains appear on prints from my Ricoh All in One Printer?
Black lines or stains may appear on prints from your Ricoh All in One Printer if there is no margin or a solid image area near the leading edge of the original. To resolve this, create a margin of at least 5 mm (0.2 inches) at the leading edge. Also, inspect the document feeder and clean it if you notice any dirt.
What to do if I get white or incomplete prints from my Ricoh All in One Printer?
If you are getting white or incomplete prints from your Ricoh All in One Printer, pull out the drum unit. Remove the master from the drum and any paper that is stuck to the drum. Then, re-insert the drum unit until it locks in position, and lower the drum unit lock lever.
What to do if a paper misfeed occurs in the paper feed section of my Ricoh All in One Printer?
If a paper misfeed occurs in the paper feed section of your Ricoh All in One Printer, lower the paper feed tray adjustment lever and slowly but firmly pull out the paper.
What to do if a paper misfeed occurs in the paper delivery section of my Ricoh All in One Printer?
If a paper misfeed occurs in the paper delivery section of your Ricoh All in One Printer, remove the misfed paper.
What to do if the master or paper is wrapped around the drum, or a paper misfeed occurs inside my Ricoh All in One Printer?
If the master or paper is wrapped around the drum, or if a paper misfeed occurs inside your Ricoh All in One Printer, pull out the drum unit and remove the misfed paper.
What to do if a master misfeed occurs in the master eject section of my Ricoh All in One Printer?
If a master misfeed occurs in the master eject section of your Ricoh All in One Printer, pull out the master eject box. Remove the misfed master and return the master eject box to its original position.
How to resolve original misfeed in the document feeder of my Ricoh All in One Printer?
To resolve an original misfeed in the document feeder of your Ricoh All in One Printer, open the cover of the document feeder. Gently pull out the original, and then close the cover of the document feeder.
How to fix dirt on the back side of paper from my Ricoh All in One Printer?
If you notice dirt on the back side of paper from your Ricoh All in One Printer, especially when using paper smaller than the original, ensure you've selected the correct reduction ratio. Then, turn off the main switch, pull out the drum unit, and clean the pressure roller with a clean cloth. Also, use a clean cloth to remove any ink accumulated on the trailing edge of the drum unit.
General| Resolution | 300 x 300 dpi |
|---|---|
| Output Capacity | 1, 000 sheets |
| Master making time | Approx. 30 seconds |
| Paper Size | A4, A5, B5 |
| Printing process | Inkjet |
| Original type | Sheet |
| Image position adjustment | Vertical: ±10 mm, Horizontal: ±10 mm |
| Image mode | Photo |
| Master ejection capacity | 30 sheets |
| Power source | 220 - 240 V, 50/60 Hz |
| Original size | A4, A5, A6, B5, Letter, Legal, Envelopes |
| Paper feed/stack capacity | 1, 000 sheets |
Important safety precautions to follow while operating the machine.
Disposal and recycling information for users in specific European regions.
Disposal instructions for users outside the specified European regions.
Description of the various keys on the machine's control panel.
Explanation of the different indicator lights and their meanings.
Details on paper types suitable for the machine.
Specifications and guidelines for input documents.
Steps to prepare the machine for printing.
Basic procedure for making prints.
Steps to complete after the printing process.
How to control the placement of the printed image.
Procedures for controlling print darkness or lightness.
Adjusting the machine's printing speed.
Procedures for interrupting and resuming print jobs.
Using predefined ratios for scaling images.
Guidelines for using various paper thicknesses.
Choosing the appropriate mode for different originals.
Automating master creation and printing.
Printing two originals on a single sheet.
How to perform color printing with optional drums.
Steps for creating color prints using the machine.
Procedure for replacing the color drum unit.
Method for printing in two different colors on one page.
Instructions for loading paper into the tray.
Process for adjusting paper size settings.
Guidance when ink needs to be supplied.
Procedure for replacing the master roll.
Initial error diagnosis and troubleshooting steps.
Procedures for resolving paper jams and other feed errors.
Steps to resolve issues indicated by open cover/unit warnings.
Procedure for emptying the master eject box.
Diagnosing and fixing common print quality problems.
General operational advice and precautions.
Notes on handling and using print paper.
Additional notes regarding original documents.
Guidelines for optimal machine placement and environment.
Instructions for safely connecting the machine to a power source.
Requirements for machine clearance.
Regular cleaning procedures for key parts.
Chart showing compatibility of different operational modes.
Key physical and functional attributes of the machine.
Details on supported paper size, weight, and margins.
Specifications for print speed and copy times.
Physical size and capacity of key components.
Sound power and pressure levels during operation.
Information on required supplies like masters and ink.
