5.2. SCANNER
5.2.1. CIS [A]
[A]
H068R004.WMF
First, remove the upper cover and the scanner roller.
[A]: CIS (2 tabs, 1 connector)
After installing the CIS, the shading adjustment should be done using service function no.
10 (see section 4.1.15).
NOTE:
1. Make sure the spring plate guides [B] are arranged as shown.
2. Do not touch the glass surface of the CIS with bare hands.
August 7th, 1995 REPLACEMENT AND ADJUSTMENT
SCANNER
5-3
To Next Page
Loading...
