Default Settings
The factory settings are quoted either in hexadecimal code (the actual con-
tents of the RAM address) if there is a H after the value in the table, or in
decimal (converted from the actual hex contents of the RAM address) if there
is no H after the value.
Some RAMs must be stored using BCD; see the NCU Parameter definition ta-
ble for details.
(The RAM address for BR1 is in "( )", exsample for (0067XX) )
Country
807F01
(006701)
807F02
(006702)
807F03
(006703)
807F04
(006704)
807F05
(006705)
Israel FFH FFH FFH 0H BAH
USA FFH FFH FFH FFH FFH
Asia FFH FFH FFH FFH FFH
Hong Kong FFH FFH FFH FFH FFH
South Africa FFH FFH FFH FFH FFH
Australia FFH FFH FFH 1H 10H
New Zealand FFH FFH FFH FFH FFH
Singapore FFH FFH FFH FFH FFH
Malaysia FFH FFH FFH FFH FFH
China FFH FFH FFH FFH FFH
Country
807F06
(006706)
807F07
(006707)
807F08
(006708)
807F09
(006709)
807F0A
(00670A)
Israel 4H 00H 105 E8H 3H
USA FFH FFH FFH FFH FFH
Asia FFH FFH FFH FFH FFH
Hong Kong FFH FFH FFH FFH FFH
South Africa FFH FFH FFH FFH FFH
Australia 4H 00H 150 2CH 1H
New Zealand FFH FFH FFH FFH FFH
Singapore FFH FFH FFH FFH FFH
Malaysia FFH FFH FFH FFH FFH
China FFH FFH FFH FFH FFH
Country
807F0B
(00670B)
807F0C
(00670C)
807F0D
(00670D)
807F0E
(00670E)
807F0F
(00670F)
Israel 105 4 200 0 FFH
USA FFH FFH 100 0 FFH
Asia FFH FFH 200 0 FFH
Hong Kong FFH FFH 100 0 FFH
South Africa FFH FFH 100 0 FFH
Australia 100 8 150 0 FFH
New Zealand FFH FFH 200 0 FFH
Singapore FFH FFH 100 0 FFH
Malaysia FFH FFH 100 0 FFH
China FFH FFH C8 00 FFH
August 7th, 1995 SERVICE TABLES AND PROCEDURES
NCU PARAMETERS
4-49
To Next Page
Loading...
