(To see the scanned and printed
page counters, press #.
SCAN : 012345
PRINT : 012345
To see the printer and scanner jam count-
ers, press # again.)
S.JAM: 000000
P.JAM: 000000
4. To change the contents of a counter,
input the new value, then press Y .
5. To finish: FU
4.1.9. NCU Parameters (Function 08)
1. FU 6 1 9 9 5
then immediately Y
FUNCTION KPAD/NEXT
SERVICE FUNCTIONS
2. 0 8 Y
3. 0
0-NCU 1-MODEM
2-DTMF
4. Scroll through the parameters using
> or < . If you want to change a
value, enter the new value at the keypad,
then press Y .
Example: Set NCU parameter 04 to 005.
>>>> 0 0 5 Y
NCU KPAD/<>
NO.04 = 005
5. To finish : N FU.
Note: Parameter CC is the Country Code, Parameter 01 is the Tx level.
Refer to section 4.3 for full details on NCU parameters.
4.1.10. Modem Test (Function 08)
1. FU 6 1 9 9 5
then immediately Y
FUNCTION KPAD/NEXT
SERVICE FUNCTIONS
2. 0 8 Y
0-NCU 1-MODEM
2-DTMF
August 7th, 1995 SERVICE TABLES AND PROCEDURES
SERVICE LEVEL FUNCTIONS
4-5
To Next Page
Loading...
