System Switch 0F
No FUNCTION COMMENTS
0
to
7
Country code for functional settings
(Hex)
00: France 10: Not used
01: Germany 11: USA
02: UK 12: Asia
03: Italy 13: Japan
04: Austria 14: Hong Kong
05: Belgium 15: South Africa
06: Denmark 16: Australia
07: Finland 17: New Zealand
08: Ireland 18: Singapore
09: Norway 19: Malaysia
0A: Sweden 1A: China
0B: Switz. 1B: Taiwan
0C: Portugal 20: Turkey
0D: Holland 21: Greece
0E: Spain
0F: Israel
This country code determines the factory
settings of bit switches and RAM addresses.
However, it has no effect on the NCU
parameter settings and communication
parameter RAM addresses.
Cross reference
NCU country code: Function 08, parameter
CC.
System Switch 10 - Not used (do not change the settings)
System Switch 11
No FUNCTION COMMENTS
0
TTI printing position
0: On the image
1: Outside the image area
0: The TTI is superimposed on the machine.
1: The TTI is printed outside the image area.
1
to
7
Not used Do not change the settings.
System Switch 12
No FUNCTION COMMENTS
0
to
7
TTI printing position in the
main scan direction
08 to 92 (BCD) mm. Input even numbers only.
This setting determines the TTI print start position from
the left edge of the paper. If the TTI is moved too far to
the right, it may be obscured by the file number which
is on the top right of the page.
System Switch 13-1F - Not used (do not change the settings)
August 7th, 1995 SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-19
To Next Page
Loading...
