5
4. Update the firmware
1.
Make sure that the camera’s power is turned
off.
2. While pressing the ! button (
1
), hold down
the 6 (Playback) button (
2
) for 2-3 seconds.
• A confirmation message for the firmware update is
displayed on the picture display.
3. Press the $ button to select [Yes], and press
the MENU/OK button.
• The firmware update starts, and the following message
is displayed on the picture display.
[Checking rewrite file]
[Rewriting program]
4. The camera automatically turns off and restarts.
• If the message [Incorrect rewriting file] is displayed and the camera is automatically turned off, check the camera model
again and retry the update using the correct firmware.
• The firmware files copied to the SD memory card are deleted when you format the SD memory card. Delete them if
necessary.
! (
1
)
6 (
2
)
To Previous Page
Loading...
