・The noise of image may be noticeable if you select [High] of the [Shadow Correction].
Q: What is the [Preview]?
A: You can check the depth of field before shooting the image.
・When [Hold Movie/Wireless Btn.] of the [Fn Button Setting] menu is set to [Preview] at the
C
□
,2 [Customize Controls] menu, the Aperture preview is available.
If you press and hold
(Movie/Wireless) button, the aperture will change to set value, and you can check
the depth of field.
When you release the
(Movie/Wireless) button, the [Preview] mode is canceled.
・In the [Preview] mode, the shutter release cannot be operated, and the aperture value cannot be changed.
・When the Flash is in use, Preview value and actual aperture value may differ.
・Because the [Preview] is used for checking the depth of field, the AE system may not function properly.
・
The [Preview] is not available at the (Movie) mode.
You can select from [Auto], [On] or [Off]
You can’t select [On] at the (movie) mode
You can select from [Auto], [Low], [Medium],
[High] or [Off]
To Next Page
Loading...
